View AP-CF008GE3FR-NDNRJ_8216698.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 1 ? 2009 apacer technology inc. rev. 1.2 rohs compliant value added value added value added value added compact flash series specification for industrial cf february 11, 2009 version 1.2 apacer technology inc. 9/f, no. 100, hsin tai wu rd., hsichih, taipei hsie n 221, taiwan tel: +886-2-2696-1666 fax: +886-2-2696-1668 www.apacer.com
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 2 ? 2009 apacer technology inc. rev. 1.2 features: compact flash association specification revision 3.0 standard interface C ata command set compatible C ata mode support for up to: pio mode-6 multiword dma mode-4 ultra dma mode-4 connector type C 50 pins female low power consumption (typical) C supply voltage: 3.3v & 5v C active mode: 80 ma/95 ma (3.3v/5.0v) C sleep mode: 700 a/900 a (3.3v/5.0v) performance C sustained read: up to 35 mb/sec C sustained write: standard: up to 15 mb/sec high speed: up to 25 mb/sec capacity C standard: 128, 256, 512 mb 1, 2, 16 gb C high speed: 256, 512 mb 1, 2, 4, 8 gb nand flash type: slc temperature ranges C operation: standard: 0c to 70c et 1 : -40c to 85c C storage: -40c to 100c flash management C intelligent endurance design advanced wear-leveling algorithms s.m.a.r.t. technology built-in hardware ecc enhanced data integrity C intelligent power failure recovery rohs compliant 1. extended temperature
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 3 ? 2009 apacer technology inc. rev. 1.2 table of contents 1. general description ............................. ................................................... .................... 4 1.1 p erformance -o ptimized c ontroller ................................................... ................................................... ......4 1.1.1 power management unit (pmu).................. ................................................... .............................................4 1.1.2 sram buffer .................................. ................................................... ................................................... .........4 2. functional block ................................ ................................................... ....................... 5 3. pin assignments ................................. ................................................... ........................... 6 4. capacity specification.......................... ................................................... .................. 8 4.1 p erformance s pecification ................................................... ................................................... .......................8 4.2 e nvironmental s pecifications ................................................... ................................................... .................9 5. flash management ................................ ................................................... ................... 10 5.1 i ntelligent e ndurance d esign ................................................... ................................................... ...............10 5.1.1 advanced wear-leveling algorithms ............ ................................................... ............................................10 5.1.2 s.m.a.r.t. technology ........................ ................................................... ................................................... .10 5.1.3 built-in hardware ecc ........................ ................................................... ................................................... 10 5.1.4 enhanced data integrity...................... ................................................... ................................................... .10 5.2 i ntelligent p ower f ailure r ecovery ................................................... ................................................... ...11 6. software interface ............................. ................................................... .................. 12 6.1 c ommand s et ................................................... ................................................... .............................................12 7. electrical specification ....................... ................................................... ............ 14 8. physical characteristics ....................... ................................................... ........... 15 8.1 d imension ................................................... ................................................... ................................................... 15 9. product ordering information ................... ................................................... .. 16 9.1 p roduct c ode d esignations ................................................... ................................................... ...................16 9.2 v alid c ombinations ................................................... ................................................... .................................17
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 4 ? 2009 apacer technology inc. rev. 1.2 1. general description apacers industrial compact flash card (cfc) offers the most reliable and high performance storage which is compatible with cf type i and type ii devi se. unlike the ordinary consumer compact flash cards, apacer industrial compact flash card provide s solid traceability to ensure all products hw/sw a re the same as you qualified. apacers cfc provides complete pcmcia - ata functio nality and compatibility. apacer s compact flash technology is designed for use in point of sale (po s) terminals, telecom, ip-stb, medical instruments, surveillance systems, industrial pcs and handheld a pplications. featuring technologies as advanced wear-leveling al gorithms, s.m.a.r.t, enhanced data integrity, built - in hardware ecc, and intelligent power failure reco very, apacers industrial compact flash card assures users of a versatile device on data storage . 1.1 performance-optimized controller the compact flash card controller translates standa rd cf signals into flash media data and control signals. 1.1.1 power management unit (pmu) the power management unit (pmu) controls the power consumption of the compact flash card controller. it reduces the power consumption of the compact fla sh card controller by putting circuitry not in operation into sleep mode. the pmu has zero wake-up latency. 1.1.2 sram buffer the compact flash card controller performs as an sr am buffer to optimize the hosts data transfer to and from the flash media.
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 5 ? 2009 apacer technology inc. rev. 1.2 2. functional block the compact flash card (cfc) includes a controller and flash media, as well as the compact flash standard interface. figure 2-1 shows the functional block diagram. figure 2-1: functional block diagram flash media flash media flash media flash media flash array compact flash interface compact flash controller
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 6 ? 2009 apacer technology inc. rev. 1.2 3. pin assignments table 3-1 lists the pin assignments with respective signal names for the 50-pin configuration. a # s uffix indicates the active low signal. the pin type can b e input, output or input/output. table 3-1: pin assignments (1 of 2) memory card mode i/o card mode true ide mode pin no. signal name pin i/o type signal name pin i/o type signal name pin i/o type 1 gnd - gnd - gnd - 2 d3 i/o d3 i/o d3 i/o 3 d4 i/o d4 i/o d4 i/o 4 d5 i/o d5 i/o d5 i/o 5 d6 i/o d6 i/o d6 i/o 6 d7 i/o d7 i/o d7 i/o 7 #ce1 i #ce1 i #ce1 i 8 a10 i a10 i a10 1 i 9 #oe i #oe i #oe i 10 a9 i a9 i a9 1 i 11 a8 i a8 i a8 1 i 12 a7 i a7 i a7 1 i 13 vcc - vcc - vcc - 14 a6 i a6 i a6 1 i 15 a5 i a5 i a5 1 i 16 a4 i a4 i a4 1 i 17 a3 i a3 i a3 1 i 18 a2 i a2 i a2 i 19 a1 i a1 i a1 i 20 a0 i a0 i a0 i 21 d0 i/o d0 i/o d0 i/o 22 d1 i/o d1 i/o d1 i/o 23 d2 i/o d2 i/o d2 i/o 24 wp o #iocs16 o #iocs16 o 25 #cd2 o #cd2 o #cd2 o 26 #cd1 o #cd1 o #cd1 o 27 d11 i/o d11 i/o d11 i/o 28 d12 i/o d12 i/o d12 i/o 29 d13 i/o d13 i/o d13 i/o 30 d14 i/o d14 i/o d14 i/o 31 d15 i/o d15 i/o d15 i/o 32 #ce2 i #ce2 i #ce2 i 33 #vs1 o #vs1 o #vs1 o 34 #iord i #iord i #iord i 35 #iowr i #iowr i #iowr i 36 #we i #we i #we i 37 rdy/-bsy o -ireq o intrq o 38 vcc - vcc - vcc - 39 #csel i #csel i #csel i 40 #vs2 o #vs2 o #vs2 o 41 reset i reset i reset i
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 7 ? 2009 apacer technology inc. rev. 1.2 table 3-1: pin assignments (2 of 2) pin no. memory card mode i/o card mode true ide mode signal name pin i/o type signal name pin i/o type signal name pin i/o type 42 #wait o #wait o iordy o 43 #inpack o #inpack o dmarq 2 o 44 -reg i #reg i dmack 2 i 45 bvd2 o #spkr o #dasp o 46 bvd1 o #stschg o #pdiag o 47 d8 i/o d8 i/o d8 i/o 48 d9 i/o d9 i/o d9 i/o 49 d10 i/o d10 i/o d10 i/o 50 gnd - gnd - gnd - 1. the signal should be t ied to vcc by the host. 2. connection required when udma is in use.
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 8 ? 2009 apacer technology inc. rev. 1.2 4. capacity specification capacity specification of the compact flash card se ries (cfc) is available as shown in table 4-1. it l ists the specific capacity and the default numbers of he ads, sectors and cylinders for each product line. table 4-1: capacity specifications capacity total bytes cylinders heads sectors max lba 128 mb 127,641,600 980 8 32 250,880 256 mb 256,352,256 980 16 32 501,760 512 mb 511,664,128 993 16 63 1,000,944 1gb 1,024,655,360 1,986 16 63 2,001,888 2gb 2,048,589,824 3,970 16 63 4,001,760 4gb 4,100,059,136 7,964 16 63 8,027,712 8gb 8,176,340,992 15,880 16 63 16,007,040 16gb 16,368,721,920 16,383 * 16 63 32,014,080 1. cylinders, heads or sectors are not applicable for these capacities. only lba addressing applies 4.1 performance specification performances of the standard and high speed ata-fla sh disk are listed in table 4-2 and table 4-3. table 4-2: standard performance specifications capacity performance 128 mb / 256 mb 512 mb / 1 gb 2 gb 16 gb sustained read (mb/s) 18 30 35 22 sustained write (mb/s) 7 12 15 15 table 4-3: high speed performance specifications capacity performance 256 mb / 512 mb 1gb / 2 gb / 4 gb / 8 gb sustained read (mb/s) 30 35 sustained write (mb/s) 13 22~25
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 9 ? 2009 apacer technology inc. rev. 1.2 4.2 environmental specifications environmental specification of the compact flash ca rd series (cfc) which follows the mil-std-810f standards is available as shown in table 4-4. table 4-4: environmental specifications environment specification operation 0c to 70c; -40c to 85c (et 1 ) temperature storage -40c to 100c humidity 5% to 95% rh (non-condensing) vibration (non-operation) sine wave: 10~2000hz, 15g (x, y, z axes) shock (non-operation) half sine wave, peak accelera tion 50 g, 11 ms (x, y, z ; all 6 axes) 1. extended temperature
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 10 ? 2009 apacer technology inc. rev. 1.2 5. flash management 5.1 intelligent endurance design 5.1.1 advanced wear-leveling algorithms the nand flash devices are limited by a certain num ber of write cycles. when using a file system, frequent file table updates is mandatory. if some a rea on the flash wears out faster than others, it w ould significantly reduce the lifetime of the whole devi ce, even if the erase counts of others are far from the write cycle limit. thus, if the write cycles can be distributed evenly across the media, the lifetime of the media can be prolonged significantly. the scheme is achieved both via buffer management and apacer- specific advanced wear leveling to ensure that the lifetime of the flash media can be increased, and t he disk access performance is optimized as well. 5.1.2 s.m.a.r.t. technology s.m.a.r.t. is an acronym for self-monitoring, analy sis and reporting technology, an open standard allowing disk drives to automatically monitor their own health and report potential problems. it prote cts the user from unscheduled downtime by monitoring and st oring critical drive performance and calibration parameters. ideally, this should allow taking proac tive actions to prevent impending drive failure. ap acer smart feature adopts the standard smart command b0h to read data from the drive. when the apacer smart utility running on the host, it analyzes and reports the disk status to the host before the devi ce is in critical condition. 5.1.3 built-in hardware ecc the ata-disk module uses bch error detection code ( edc) and error correction code (ecc) algorithms which correct up to eight random single- bit errors for each 512-byte block of data. high performance is fulfilled through hardware-based err or detection and correction. 5.1.4 enhanced data integrity the properties of nand flash memory make it ideal f or applications that require high integrity while operating in challenging environments. the integrit y of data to nand flash memory is generally maintained through ecc algorithms and bad block man agement. flash controllers can support up to 8 bits ecc capability for accuracy of data transactio ns, and bad block management is a preventive mechanism from loss of data by retiring unusable me dia blocks and relocating the data to the other blo cks, along with the integration of advanced wear levelin g algorithms, so that the lifespan of device can be expanded.
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 11 ? 2009 apacer technology inc. rev. 1.2 5.2 intelligent power failure recovery the low power detection on the controller initiates cached data saving before the power supply to the device is too low. this feature prevents the device from crash and ensures data integrity during an unexpected blackout. once power was failure before cached data writing back into flash, data in the cache will lost. the next time the power is on, the controller will check these fragmented data segmen t, and, if necessary, replace them with old data kept in flash until programmed successfully.
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 12 ? 2009 apacer technology inc. rev. 1.2 6. software interface 6.1 command set table 6-1 summarizes the command set with the parag raphs that follow describing the individual commands and the task file for each. table 6-1: command set (1 of 2) command code fr 1 sc 2 sn 3 cy 4 dh 5 lba 6 check-power-mode e5h or 98h - - - - d 8 - execute-drive-diagnostic 90h - - - - d - erase sector(s) c0h - y y y y y flush-cache e7h - - - - d - format track 50h - y 7 - y y 8 y identify-drive ech - - - - d - idle e3h or 97h - y - - d - idle-immediate e1h or 95h - - - - d - initialize-drive-parameters 91h - y - - y - nop 00h - - - - d - read-buffer e4h - - - - d - read-dma c8h or c9h - y y y y y read-multiple c4h - y y y y y read-sector(s) 20h or 21h - y y y y y read-verify-sector(s) 40h or 41h - y y y y y recalibrate 1xh - - - - d - request-sense 03h - - - - d - seek 7xh - - y y y y set-features efh y 7 - - - d -
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 13 ? 2009 apacer technology inc. rev. 1.2 table 6-1: command set (2 of 2) command code fr 1 sc 2 sn 3 cy 4 dh 5 lba 6 smart b0h y y y y d set-multiple-mode c6h - y - - d - set-sleep-mode e6h or 99h - - - - d - standby e2h or 96h - - - - d - standby-lmmediate e0h or 94h - - - - d - translate-sector 87h - y y y y y write-buffer e8h - - - - d - write-dma cah or cbh - y y y y y write-multiple c5h - y y y y y write-multiple-without-erase cdh - y y y y y write-sector(s) 30h or 31h - y y y y y write-sector-without-erase 38h - y y y y y write-verify 3ch - y y y y y 1. fr - features register 2. sc - sector count register 3. sn - sector number register 4. cy - cylinder registers 5. dh - drive/head register 6. lba - logical block address mode supported (see co mmand descriptions for use) 7. y - the register contains a valid parameter for th is command 8. for the drive/head register: y means both the cfc and head parameters are used d means only the cfc parameter is valid and not the head parameter
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 14 ? 2009 apacer technology inc. rev. 1.2 7. electrical specification caution: absolute maximum stress ratings C applied conditions greater than those listed under absolute maximum stress ratings may cause permane nt damage to the device. this is a stress rating only and functional operation of the device at thes e conditions or conditions greater than those defin ed in the operational sections of this data sheet is not implied. exposure to absolute maximum stress rating conditions may affect device reliability. table 7-1: operating range range ambient temperature 3.3v 5v standard 0c to +70c extended temperature -40c to +85c 3.135-3.465v 4.75-5.25v table 7-2: absolute maximum power pin stress ratings parameter symbol conditions input power v dd -0.3v min. to 6.5v max. voltage on any pin except v dd with respect to gnd v -0.5v min. to vdd + 0.5v max . table 7-3: recommended system power-up timing symbol parameter typical maximum units t pu-ready 1 power-up to ready operation 200 1000 ms t pu-write 1 power-up to write operation 200 1000 ms 1. this parameter is measured only for initial qual ification and after a design or process change that could affect this parameter.
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 15 ? 2009 apacer technology inc. rev. 1.2 8. physical characteristics 8.1 dimension t able 8-1: type i cfc physical specification length: 36.40 +/- 0.15mm (1.433+/- 0.06 in.) width: 42.80 +/- 0.10mm (1.685+/- 0.04 in.) thickness (including label area): 3.3mm+/-0.10mm (0.130+/-0.04in.) f igure 8-1: physical dimension unit: mm
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 16 ? 2009 apacer technology inc. rev. 1.2 9. product ordering information 9.1 product code designations a p C c f x x x x e 3 x r C xxxxj cfc type capacity: 128m: 128mb 256m: 256mb 512m: 512mb 001g: 1gb 002g: 2gb 004g: 4gb 008g: 8gb 016g: 16gb model name apacer product code configuration e: standard f : high speed specification nr: non-removable setting ndnr: non-dma + non-removable etnr: ext. temp. + non-removable etndnr: ext. temp + non-dma + non-removable j: value added rohs compliant controller type
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 17 ? 2009 apacer technology inc. rev. 1.2 9.2 valid combinations standard temperature non-removable standard high speed capacity p/n capacity p/n 128mb ap-cf128me3er-nrj 256mb ap-cf256me3fr-nrj 256mb ap-cf256me3er-nrj 512mb ap-cf512me3fr-nrj 512mb ap-cf512me3er-nrj 1gb ap-cf001ge3fr-nrj 1gb ap-cf001ge3er-nrj 2gb ap-cf001ge3fr-nrj 2gb ap-cf002ge3er-nrj 4gb ap-cf004ge3fr-nrj 16gb ap-cf016ge3er-nrj 8gb ap-cf008ge3fr-nrj non-dma & non-removable standard high speed capacity p/n capacity p/n 128mb ap-cf128me3er-ndnrj 256mb ap-cf256me3fr-ndnrj 256mb ap-cf256me3er-ndnrj 512mb ap-cf512me3fr-ndnrj 512mb ap-cf512me3er-ndnrj 1gb ap-cf001ge3fr-ndnrj 1gb ap-cf001ge3er-ndnrj 2gb ap-cf001ge3fr-ndnrj 2gb ap-cf002ge3er-ndnrj 4gb ap-cf004ge3fr-ndnrj 16gb ap-cf016ge3er-ndnrj 8gb AP-CF008GE3FR-NDNRJ
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 18 ? 2009 apacer technology inc. rev. 1.2 extended temperature non-removable standard high speed capacity p/n capacity p/n 128mb ap-cf128me3er-etnrj 256mb ap-cf256me3fr-etnrj 256mb ap-cf256me3er-etnrj 512mb ap-cf512me3fr-etnrj 512mb ap-cf512me3er-etnrj 1gb ap-cf001ge3fr-etnrj 1gb ap-cf001ge3er-etnrj 2gb ap-cf001ge3fr-etnrj 2gb ap-cf002ge3er-etnrj 4gb ap-cf004ge3fr-etnrj 16gb ap-cf016ge3er-etnrj 8gb ap-cf008ge3fr-etnrj non-dma & non-removable standard high speed capacity p/n capacity p/n 128mb ap-cf128me3er-etndnrj 256mb ap-cf256me3fr-etndnrj 256mb ap-cf256me3er-etndnrj 512mb ap-cf512me3fr-etndnrj 512mb ap-cf512me3er-etndnrj 1gb ap-cf001ge3fr-etndnrj 1gb ap-cf001ge3er-etndnrj 2gb ap-cf001ge3fr-etndnrj 2gb ap-cf002ge3er-etndnrj 4gb ap-cf004ge3fr-etndnrj 16gb ap-cf016ge3er-etndnrj 8gb ap-cf008ge3fr-etndnrj
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 19 ? 2009 apacer technology inc. rev. 1.2 revision history revision date description remark 1.0 12/30/2008 official release 1.1 01/08/2009 context revised 1.2 02/11/2009 modified document layout
value added value added value added value added compact flash series ap-cfxxxxe3xr-xxxxj 20 ? 2009 apacer technology inc. rev. 1.2 global presence taiwan (headquarters) apacer technology inc. 9f, 100, sec. 1, hsin tai wu rd., hsichih, 221 taipei hsien taiwan, r.o.c. tel: +886-2-2696-1666 fax: +886-2-2696-1668 amtsales@apacer.com u.s.a. apacer memory america, inc. 386 fairview way, suite102, milpitas, ca 95035 tel: 1-408-586-1291 fax: 1-408-935-9611 sa@apacerus.com japan apacer technology corp. 5f, matsura bldg., shiba, minato-ku tokyo, 105-0014, japan tel: 81-3-5419-2668 fax: 81-3-5419-0018 jpservices@apacer.com europe apacer technology b.v. europalaan 89 5232 bc 's-hertogenbosch the netherlands tel: 31-73-645-9620 fax: 31-73-645-9629 sales@apacer.nl china apacer electronic (shanghai) co., ltd 1301, no.251,xiaomuqiao road, shanghai, 200032, china tel: 86-21-5529-0222 fax: 86-21-5206-6939 sales@apacer.com.cn india apacer technologies pvt. ltd. #143, 1st floor, raheja arcade, 5th block kormangala industrial layout, bangalore - 560095, india tel: 91-80-4152-9061 sales_india@apacer.com
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: apacer: ? ap-cf256me3fr-etndnrk? ap-cf256me3fr-etnrk

▲Up To Search▲

Price & Availability of AP-CF008GE3FR-NDNRJ

	To Download AP-CF008GE3FR-NDNRJ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .